Slam All Purpose Descaler 3x30ml

Product Information

Half fill water reservoir and add the content of 1 sachet. Leave for 8 minutes and filter solution through. Rinse thoroughly with water. Half fill kettle with water and boil. Unplug and carefully add the contents of 1 sachet. Leave for just 8 minutes for 100% limescale removal*. Rinse thoroughly with water. Please note that during particularly busy periods, it may take a little longer to receive your delivery and our carrier may attempt to deliver to you on a Saturday. All Purpose Oust Descaleris one of the best-known branded options, and can be used for shower heads, steam irons, coffee makers, and kettles. When using it to clean a kettle, half-fill the jug with water and boil it. Once boiled, unplug it and place it in an empty sink – in case of spills – then slowly add the contents of a single sachet of Oust. Leave it for ten minutes to do its work. If there is still evidence of limescale in the kettle, switch it on to reheat until the solution starts to fizz, but don’t allow it to boil or you risk it overflowing the spout or lid. Empty the kettle and rinse it, boil a fresh kettle of water without any Oust, discard it, and repeat. For heavily scaled kettles, it may be necessary to use two sachets at once. That said, you should still get into the habit of throwing out stale water. Only boil as much water as you need – you’ll save money by not running the kettle for longer than is necessary, and will minimise limescale build-up by not exposing the element to large quantities of water-based minerals – and avoid reboiling water whenever possible.

We’ll run through some of the best options for removing limescale from your kettle below. But first, we’ll explore what limescale is, where it comes from, and whether it’s a health risk. You may also need to replace a limescale-caked kettle sooner than you intended. According to several sources, including kitchen appliance designer Kutchina, “the average lifespan of a good quality electric kettle is 4 years to 5 years maximum”. If you’re putting yours under strain by forcing it to work longer and harder, those figures might prove optimistic. How does limescale build up in a kettle? Scottish Highlands & Islands postcodes: AB, FK, HS, IV, KA, KW, PA, PH, ZE, LL58-LL78, IM, TR, PO30-41 Heat iron until hot to the touch and unplug. Empty 1 sachet in a jug and pour into iron's water chamber. Top up with water and set to steam. Leave for 8 minutes for solution to drain through steam holes.Multipurpose– Use on any of your household appliances such as kettles, irons, toasters, shower heads, coffee machines and more. Limescale, in small quantities, does not have any bad repercussions on your organism,” says Procter & Gamble. “On the contrary: most mineral waters you find in stores have minerals like magnesium and calcium that are good for your body.”

This natural solution doesn’t rely on any chemicals, so it’s both kind to the environment and inexpensive. Thinly slice a lemon and drop the slices into your kettle. Fill the kettle to the top of the area affected by limescale (but not above any maximum fill guide, or below any minimum), then boil it and allow it to cool without pouring out the water or removing the lemons. Once it has cooled, boil it again, allow to cool, then pour away the water and rinse it out. If you wish to return your item to Robert Dyas, you can do so by one of the following methods: 1. Request a Collection via Robert Dyas Customer Services There are several ways to remove limescale from a kettle and, depending on the level of limescale present and the model of kettle you’re working with, finding which works best may require a little trial and error. How to remove limescale using lemon You can also select a convenient day to receive your delivery by choosing a named day delivery (delivery on working days only). This is not intended to be a full statement of your rights under the Consumer Contracts Regulations. Full details of your rights are available from your Local Authority’s Trading Standards Office. How To Return A Product

Read on to learn how to descale your kettle using dedicated products or natural remedies

READ NEXT: Our favourite rapid-boil, quiet and smart kettles How to remove limescale from your kettle

Using a filter to reduce the mineral load in your tap water before boiling can help slow down the build-up of limescale in your kettle. So can installing a water softener. But what if it’s too late for that? And the limescale has already coated the element, the walls, and the base?You can also use bottled lemon juice (but not lemon squash!) if you don’t have a lemon handy – add a couple of tablespoons to the kettle in place of the lemon slices, and, again, top up the water to cover the area affected by limescale. Boil and cool the water twice, then rinse the kettle thoroughly to avoid any lingering taste of lemon affecting the next few rounds of drinks. If this doesn’t shift the limescale either increase the ratio of lemon to water, or try an alternative solution. How to remove limescale using vinegar At that point, it’s time to take action. Cleaning limescale is something we should all do, especially if you live in a ‘hard water’ area. And, while it isn’t difficult, it does take a bit of time, particularly if you haven’t done it regularly. It may also involve the use of chemicals and hot water, so it’s advisable to take all necessary precautions to protect your skin and eyes from scalds, burns, and unwanted splashes before getting started. It’s also important to warn any other household members that the kettle is out of action until you’ve finished and thoroughly rinsed it through – you don’t want them making a chemical-laden cup of tea. Working days are defined as Monday-Friday 8am-7pm inclusive, excluding Saturday, Sunday and Public Holidays. Next Day & Named Day Delivery White vinegar can be used for cleaning a wide range of non-porous surfaces, including many kitchen worktops and sinks (but not if they’re made from wood, stone, cast iron, or stainless steel), glass, shower screens, and limescale-caked kettles. The formula is simple: without straying outside the minimum or maximum fill lines, top up the kettle to the height of the limescale with equal parts water and white vinegar. Boil the kettle, then allow it to cool before pouring away the contents and rinsing it to avoid any aftertaste.